Box with Degasser DG 6000 is a container for solvent bottles with build-in a high-efficiency degasser  that removes dissolved gasses from HPLC solvents. Its unique design assures reliable continuous operation and the highest level of continuous performance available without the need for helium degassing. Up to four solvent lines may be degassed simultaneously by one unit. The extremely low internal volume of each Teflon AF® channel (480 µl) offers very quick equilibration and very short startup times compared with PTFE degassing channels which have the same degassing efficiency.

 Specification

Specification	Description
Dimensions H x W x D	3.15" x 9" x 14.17"(85mm x 230mm x 360mm)
Weight	6 lb.(3 kg)
Channels	1-5 independent
Degassing Process	Gas permeation through a fluoropolymer membrane
Maximum Flow Rate	10 mL/min.
Degassing Capacity	~2 ppm at 1 mL/min.
Dead Volume	~480 µl per channel for standard channel
Materials contacting solvents	PEEK, Glass-filled PTFE, Teflon AF®
Power requirement if using supplied AC Adapter	100 to 240 VAC (±10%), 1A, 50 to 60 Hz (±3 Hz)
Wall Sockets 4 supplied with AC interchangeable	North America/Japan, U.K., Continental Europe, Australia
Installation Over-Voltage	Category II
Validation Output	Signal 5 mVDC / 1 mm Hg absolute from 20 to 800 mm Hg (0.100 VDC at 20 mm Hg; 4.000 VDC at 800 mm Hg)
Accuracy	±1.0% of reading ±0.010 VDC from 20 to 800 mm Hg
Operating Conditions	Ambient Temperature 10 to 35 ºC
Ambient Relative Humidity (RH)	20 to 80 % RH (without condensation)
Altitude	0 to 2000 Meters
Pollution Degree	2